Unbox Waffle.  Unlock insights.

No ladders, no batteries, no stress. Anybody can set up a Waffle.

Request a demo

The fastest way to smarter spaces

Desks are done in a flash

Stick Waffle under the corner of the desk to keep it out of sight (and safe from long legs).

Phone booths, no tools required

Attach Waffle to a phone both wall or the desk with adhesive strips. No drilling. No drama.

Meeting rooms & open spaces—easy, peasy

Mount Waffle on a wall or under a TV monitor to give it clear line of sight.

Getting started is easy

Unbox your Waffle.

Inside the box you’ll find everything you need to get started—the sensor, mount, screws and adhesive strips.

Download Density Spaces.

Get the app (iOS only) in the App Store. Then find your Waffle in the app.

Install your Waffle.

Click your Waffle into its mount, then attach to the wall, under a desk or below a TV monitor. Just make sure it’s got a clear view.

Complete setup in the app.

Set up your measurement zone, configure your Waffle and begin your workplace awakening.

Waffle
in action

Locate focus areas in seconds

At one Fortune 500 company, Waffle helps employees locate available phone booths and huddle spaces on the fly—no more wandering the floor like a lost tourist.

Get instant intel on your workspace

A social media company uses Waffle to see which seating arrangements, lounge nooks and focus zones employees gravitate toward before starting pricey redesigns.

Find savings in real estate

One large enterprise uses Waffle to expose the true story behind the badge swipes, arming workplace leaders with real data to advocate for more efficient use of space.

Treat yourself to Waffle today

Request a demo

FAQs

What do I need to install my Waffle sensor?

You’ll need the Waffle itself, a USB-C power adapter and cable (included) and an Apple device (iPhone or iPad) with WiFi and Bluetooth for setup via the Density Spaces app. You’ll also need access to a power outlet and a compatible mounting surface (wall, desk, monitor or shelf). Android users: you’ll need to phone a friend—Waffle setup is iOS-only for now. For detailed installation instructions, check out our Waffle Complete Installation Guide.Total cost of ownership (TCO) takes all factors into account: Cost of hardware, software, installation and maintenance. Waffle is self-installable in three minutes, removing the need for costly third-party installation. All Density sensors are powered. (We don’t believe in batteries.) That means there’s no need to swap out batteries when your Facilities team least expects it.
‍

How do I order mounts?

Each Waffle comes with a Wall Mount, mounting plate and adhesives included. You can order Under Mounts from our website for an additional charge.

Where should I place the Waffle for the best results?

Location is everything. Install it between 3.5 feet to 5 feet high, at least 1 foot above the surface it’s monitoring. Avoid placing objects in front of it—bookshelves, chairs or Steve from accounting. Keep it facing the target area with its LED and cable pointing downward. Bonus: mount it in the center of the wall, not in a corner, for maximum visibility.

What mounting options are available?

You’ve got three: 1) Wall mount with adhesive (quick and tidy) 2) Wall mount with screws (more permanent) 3) Under Mount (ideal for under desks or monitors). Each option comes with its own steps, but they all follow the same basic flow: prep the mount, scan the QR code, plug in the power and use the app to configure.

How do I power the Waffle sensor?

Waffle uses a USB-C cable and a 5V power adapter (included for US users). A 6-foot cable gives you some wiggle room. Don’t plug it in until the app tells you to—Bluetooth will time out after 5 minutes if you jump the gun.

What type of adapter do I need if I’m in Europe?

You’ll need a standard USB-C cable and 5V power adapter to plug in and power your Waffle.

What WiFi network types are supported?

You’ll need a standard USB-C cable and 5V power Waffle supports WPA/WPA2, but currently does not support WPA2-Enterprise, captive portals or proxies. to plug in and power your Waffle.

What do the LED colors mean?

You’ll need a standard USB-CThe LED is your setup buddy: Blue = Powered and ready to set up, Red = Bluetooth timed out, White = Setup complete and successful. If things go sideways, try a factory reset by holding the reset button for 10 seconds. You won’t lose historical data.cable and 5V power Waffle supports WPA/WPA2, but currently does not support WPA2-Enterprise, captive portals or proxies. to plug in and power your Waffle.

How do I prevent people from tampering with Waffle?

Waffle includes a hex key that allows you to lock the sensor securely to its mount, preventing people from removing it from the wall or disconnecting the USB-C cable. The hardware lock reduces the risk of tampering at the sensor level. But the power adapter remains accessible and can still be unplugged from the wall outlet. If this happens, the Waffle will appear as “offline” in the Spaces app. Simply reconnect the adapter to restore power—there’s no need to repeat the setup process. Waffle will automatically resume normal operation once power is restored.

What should I do if my Waffle isn’t working right?

Check the LED status first. If it’s flashing, try a factory reset: hold the button for 10 seconds until the LED goes red/blue. Still stuck? Email support@density.io with your sensor’s serial number – you can find it behind the mount plate.

Unbox Waffle. Unlock insights.